Search in Classifieds
Search in Groups
Search in Polls
Search in Members
Search in Members
Search in News
Search in Polls
Search in Businesses
Search in Contests
Search in Events
Search in Music Albums
Search in Music Songs
Search in Quotes
Search in Site Team
Search in Jobs
Search in Products
Search in Products
To continue using the site you need to read the revised version and agree to the policies
Informativa ai sensi degli articoli 13 e 14 del Regolamento UE n. 2016/679 (“GDPR”) Ultimo aggiornamento: 06.03.2019.
Finalità del trattamento Base giuridica del trattamento
To continue using the site you need to read the revised version and agree to the policies
Informativa ai sensi degli articoli 13 e 14 del Regolamento UE n. 2016/679 (“GDPR”) Ultimo aggiornamento: 06.03.2019.
Finalità del trattamento Base giuridica del trattamento
To continue using the site you need to read the revised version and agree to the policies
Informativa ai sensi degli articoli 13 e 14 del Regolamento UE n. 2016/679 (“GDPR”) Ultimo aggiornamento: 06.03.2019.
Finalità del trattamento Base giuridica del trattamento
To continue using the site you need to read the revised version and agree to the policies
Informativa ai sensi degli articoli 13 e 14 del Regolamento UE n. 2016/679 (“GDPR”) Ultimo aggiornamento: 06.03.2019.
Finalità del trattamento Base giuridica del trattamento
5 minutes, 24 seconds
-6 Views 0 Comments 0 Likes 0 Reviews
Buyers often hesitate over Modified Tail Lights because they cannot tell from a photograph whether the lamp will plug in, flash at the right speed, and stay dry, and that doubt is reasonable since all three depend on parts hidden behind the lens. A set of Modified Tail Lights is really a small circuit in a plastic box, and once you know what each piece does, the product descriptions start to make sense.
Begin at the back of the housing, where the plug sits. The connector carries power from the vehicle to the lamp, and its shape, pin count, and locking tab must match the socket on the car, otherwise an adapter is needed. I always hold the plug beside the old one and compare the pin layout, since a connector that looks identical in a picture can differ in the position of one pin.
Inside, the light sources are small LEDs mounted on a circuit board. Each function, such as the running glow, the brake light, the turn signal, and the reversing light, has its own group of LEDs, and a driver circuit controls how bright each one is. A running light usually burns at low output and the brake light jumps to full when the pedal goes down, which is why a single red section can show two different levels.
Turn signals are where trouble usually starts. A car expects a certain electrical load from a filament bulb, and LEDs draw far less, so the flasher unit may read a fault and blink too fast. That quick blink is known as hyper flash, and it is cured with a load resistor or a flasher designed for LEDs. I once stood behind a car in a garage while a friend pressed the indicator, and the rapid tick tick tick gave the whole problem away before either of us touched a tool.
On my bench was a sample from BaoZhiWei, which is the brand of Taizhou Baozhiwei Vehicle Industry Co., Ltd., a lighting manufacturer based in Taizhou, China, that makes LED tail lights, headlights, and custom lighting solutions for various vehicle models. The company describes integrated design and production capabilities, which is a statement about process and not a measurement of this one lamp, so I am reporting only what I could see and test by hand.
The lens does optical work as well as protection. Clear or tinted plastic passes the light, while molded patterns inside it spread the glow so the lamp looks even from behind and from an angle. Hold a lit sample at arm's length and look for bright dots, which means the pattern is not blending the LEDs, and for dark gaps where the spread falls short.
Sealing keeps the circuit alive. A ring of adhesive or a rubber gasket joins the lens to the housing, and a small vent or a sealed plug at the back lets pressure equalize as the lamp warms and cools. Moisture that gets in fogs the lens and corrodes the board, so I look at the seam for a continuous bead and press the gasket with a fingertip to feel whether it springs back.
Polarity and test lighting are worth a minute. LEDs only work with current flowing in one direction, so a reversed wire can leave a function dark even though the plug seems fine. I connect a battery to each pin in turn on the bench and note which section lights, which saves a half hour of guessing on the car.
Pictures at https://www.carlamp-factory.com show lamp shapes and lens colors, but the fit of a plug and the spread of the glow only appear when it is powered. On the sample I tested, the housing is molded plastic with a clear plastic lens bonded along a single seam, and the circuit board inside is fixed to the housing with small screws.
As a Free User, you can earn Credits and try out all the features before upgrading to the next level.
We are a secure Business Community with a growing number of active companies; we are ready to assist you with any needs you may have, share the latest updates, and help you expand your network of direct contacts.

Share this page with your family and friends.